Which pins for MIDI?

Post Reply
v8media
Posts: 2
Joined: Tue Oct 06, 2009 8:30 pm

Which pins for MIDI?

Post by v8media » Tue Oct 06, 2009 8:51 pm

Since the headers in the schematic for the Edge are not oriented in the same way as on the board, I need a reference point. Which pins in block 102 are VCC, GND, and TX?

Also, in the MIDI schematic, we have VDD, while in the DSerial one we have VCC. Are those the same thing? All I found on the internet were semantic arguments, so I'm guessing they're the same.

Thanks, Ian

GrizzlyAdams
Posts: 3
Joined: Tue Jan 06, 2009 4:37 am

Re: Which pins for MIDI?

Post by GrizzlyAdams » Tue Oct 06, 2009 9:36 pm

The pinouts are here:

http://www.natrium42.com/wiki/File:Dsee-schematic.png

Specifically you would be using pins 1,2,3 on IO2 (that is Input/Output Port 2, not 102)
1: GND
2: VDD / VCC
3: TX

Pin 2: VDD is in the corner of the board. Pin 1 is on the edge, one row closer to the DS Card edge. Pin 3 is one pin from each edge.

Code: Select all

Bottom               Top
----------    ----------
IO2 08642|    |24680 IO2
    97531|    |13579
IO1 08642|    |24680 IO1
    97531|    |13579
Last edited by GrizzlyAdams on Tue Oct 06, 2009 9:38 pm, edited 1 time in total.

Joushou
Posts: 1
Joined: Tue Oct 06, 2009 9:33 pm

Re: Which pins for MIDI?

Post by Joushou » Tue Oct 06, 2009 9:36 pm

In this case, VDD in VCC are the same... He just used them interchangeably in his schematics. (What you want is basically just 3.3v, and that's what VDD supplies)

v8media
Posts: 2
Joined: Tue Oct 06, 2009 8:30 pm

Re: Which pins for MIDI?

Post by v8media » Wed Oct 07, 2009 6:31 am

Thanks much!

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests