How should I implement __tls_get_addr (if it shouldn't be implemented already)
How should I implement __tls_get_addr (if it shouldn't be implemented already)
After looking up how to implement it, I came across this site: https://maskray.me/blog/2021-02-14-all- ... al-storage
This site explains that there's one parameter of type size_t* that points to an array of two elements, a module ID, and the offset from the beginning of the local storage respectively, and that it returns a void*. With this information, I tried some variations of this implementation:
void *__tls_get_addr(size_t *v)
{
void* localStorage = getThreadLocalStorage();
const size_t tls_index = v[1];
return localStorage + tls_index;
}
I also tried using getThreadStaticBuffers instead, with no success. (The 3ds crashes only when trying to access these specific tls variables, after returning from the __tls_get_addr function)
If anyone has any idea of how I could achieve a correct implementation I would really appreciate it .
Re: How should I implement __tls_get_addr (if it shouldn't be implemented already)
Re: How should I implement __tls_get_addr (if it shouldn't be implemented already)
Hi!
I'm trying to port librdkafka.
I managed to get TLS working (apparently) a few days ago using the "-ftls-model=initial-exec" flag to compile the library.
That way it wouldn't have to use the __tls_get_addr function.
Is there a reason we should use local-exec?
Re: How should I implement __tls_get_addr (if it shouldn't be implemented already)
Dynamic linking does not exist on 3DS, so there is effectively no difference between initial-exec and local-exec. In any case, using local-exec makes it explicit that we assume all TLS variables to be contained within the same (only) module.
Usually it should not be necessary to explicitly specify the TLS model when building code. Which exact steps did you follow to build librdkafka? To me it sounds like something is being miscompiled as a shared library (which, like I said, does not work on 3DS).
Re: How should I implement __tls_get_addr (if it shouldn't be implemented already)
I'm using this command to configure build:
Code: Select all
NM=${DEVKITARM}/bin/arm-none-eabi-nm LD=${DEVKITARM}/bin/arm-none-eabi-ld \
STRIP=${DEVKITARM}/bin/arm-none-eabi-strip \
OBJDUMP=${DEVKITARM}/bin/arm-none-eabi-objdump \
RANLIB=${DEVKITARM}/bin/arm-none-eabi-ranlib \
AR=${DEVKITARM}/bin/arm-none-eabi-ar \
STATIC_LIB_libpthread=${DEVKITARM}/arm-none-eabi/lib/libpthread.a \
STATIC_LIB_libctru=${DEVKITPRO}/libctru/lib/libctru.a
./configure --cc="${DEVKITARM}/bin/arm-none-eabi-gcc" \
--cxx="${DEVKITARM}/bin/arm-none-eabi-g++" \
--enable-static --disable-zstd --disable-ssl --disable-devel --arch=armv6k \
--CXXFLAGS=" -fno-exceptions -fpic -march=armv6k -mtune=mpcore -mtp=soft -mfloat-abi=hard -std=gnu++23 -ftls-model=initial-exec" \
--CFLAGS="-D__3DS__ -std=gnu23 -g -Wall -O2 -mword-relocations -ffunction-sections -fstack-protector-all -march=armv6k -mfloat-abi=hard -mtp=soft -fpic -ftls-model=initial-exec" \
--includedir=${DEVKITPRO}/libctru/include/ \
--libdir=${DEVKITPRO}/libctru/lib/ \
--LDFLAGS="-g -march=armv6k -mtune=mpcore -mtp=soft -fpic -mfloat-abi=hard -ftls-model=initial-exec" \
--target=arm-none-eabi --disable-shared --enable-syslog --enable-devel
After that, make'ing and make install'ing should install the static lib to ${DEVKITPRO}/libctru/ (include and lib folders) which isn't the best, but oh well.
All of the following are the changes necessary to compile the library, not for it to run and work. There are some other changes for it to half-ass run.
I'll be hosting the code in my github page as I think that's easier than making all the changes manually.
https://github.com/Noxor11/librdkafka-3ds
I wanted to include changes here, but this site thinks I'm a spammer just because I use tutanota.
-
- Site Admin
- Posts: 1902
- Joined: Tue Aug 09, 2005 3:21 am
- Location: UK
- Contact:
Re: How should I implement __tls_get_addr (if it shouldn't be implemented already)
You don't need most of what you've added to your configure command.
Code: Select all
source /opt/devkitpro/3dsvars.sh
./configure --host=arm-none-eabi --prefix=/path/to/local/libs \
--enable-static --disable-ssl --disable-devel --arch=armv6k \
--disable-shared --enable-syslog --enable-devel \
--CFLAGS=${CFLAGS} \
--CXXFLAGS=${CXXFLAGS} \
--LDFLAGS=${LDFLAGS}
Should do most of what you need. Ideally PR a package with this when it's usable. https://github.com/confluentinc/librdka ... cket_msg.h is probably something we want to sort out at toolchain level.
You should look perhaps at some way to disable ipv6 support rather than replacing ipv6 structs with ipv4 ones. I appreciate you're still just getting this thing to compile at this stage but worth noting for future endeavours.
Also: please note --prefix=/path/to/local/libs should ideally not be /opt/devkitpro/portlibs/3ds because ultimately that should be where official packages get installed & placing things there manually causes issues.
Who is online
Users browsing this forum: No registered users and 0 guests