|
|
| (14 intermediate revisions by 6 users not shown) |
| Line 1: |
Line 1: |
| If your host platform is Windows then use the [http://sourceforge.net/project/showfiles.php?group_id=114505&package_id=160396 Windows Installer/Updater] package. Otherwise you may proceed with manual installation. We are in process of putting together another cross platform installer which will make things just as easy as Windows.
| | #REDIRECT [[Getting_Started]] |
| | |
| The first thing that you need to do is create a folder for the devkitPro toolchains. Start by opening a terminal - on OSX use the apple key + space, then type terminal. In the terminal window type the following command to create a new folder - all these commands are executed by pressing the return key. You'll need to create the initial folder with root privileges
| |
| | |
| sudo mkdir -p /opt/devkitpro
| |
| | |
| Once you've done that you can grant world access to the folder so you can extract the archives with normal privileges.
| |
| | |
| sudo chmod 777 /opt/devkitpro
| |
| | |
| When we're done the layout for your devkitPro folder should end up like this, each folder links to the appropriate sourceforge package.
| |
| | |
| devkitpro
| |
| |
| |
| +-- [http://sourceforge.net/project/showfiles.php?group_id=114505&package_id=124207 devkitARM]
| |
| +-- examples
| |
| | |
| |
| | +-- [http://sourceforge.net/project/showfiles.php?group_id=114505&package_id=273883 gba]
| |
| | +-- [http://sourceforge.net/project/showfiles.php?group_id=114505&package_id=273885 gp32]
| |
| | +-- [http://sourceforge.net/project/showfiles.php?group_id=114505&package_id=159894 nds]
| |
| +-- [http://sourceforge.net/project/showfiles.php?group_id=114505&package_id=124007 libgba]
| |
| +-- [http://sourceforge.net/project/showfiles.php?group_id=114505&package_id=156460 libmirko]
| |
| +-- [http://sourceforge.net/project/showfiles.php?group_id=114505&package_id=151608 libnds]
| |
| | |
| Nothing else should be placed inside these folders unless otherwise instructed by the devkitPro toolchain maintainers. On Windows several of these folders are removed and replaced by the update system.
| |
| | |
| The first package to install is the devkitARM tarball, obtained from the [http://sourceforge.net/project/showfiles.php?group_id=114505&package_id=124207 devkitARM] link shown above. Download the appropriate tarball for your host platform - the files are named as devkitARM_<revision>-<processor>-<os>.tar.bz2. For OSX we provide universal binaries - devkitARM_<revision>-osx.tar.bz2.
| |
| | |
| Once the file is downloaded then you need to extract it into the devkitpro folder
| |
| | |
| cd /opt/devkitpro
| |
| tar -xvjf <file you downloaded>
| |
| | |
| Obviously replace <file you downloaded> with the name of the file obtained from sourceforge. On OSX you can simply drag & drop the downloaded file into the terminal window to get the file path.
| |
| | |
| Now you need to obtain the support libraries for your target platform - we'll start with the Nintendo DS libraries.
| |
| | |
| Download the latest binary of [http://sourceforge.net/project/showfiles.php?group_id=114505&package_id=151608 libnds] then create a new folder and extract the tarball from the terminal window as before. '''Note:''' This is the file without "-src-" in the name.
| |
| | |
| mkdir libnds
| |
| cd libnds
| |
| tar -xvjf <libnds tarball>
| |
| | |
| Again, replace <libnds tarball> with the name of the file obtained from sourceforge. On OSX you can simply drag & drop the downloaded file into the terminal window to get the file path.
| |
| | |
| Now download [http://sourceforge.net/project/showfiles.php?group_id=114505&package_id=197264 libfat-nds], this is the libfat-nds tarball and may not be in the release at the top of the list. You may need to expand the second section to find the appropriate file. This should be extracted to the same folder as the libnds tarball earlier.
| |
| | |
| tar -xvjf <libfat-nds tarball>
| |
| | |
| Download the [http://sourceforge.net/project/showfiles.php?group_id=114505&package_id=199021 dswifi] tarball and extract in the same place.
| |
| | |
| tar -xvjf <dswifi tarball>
| |
| | |
| Download the [http://sourceforge.net/project/showfiles.php?group_id=114505&package_id=273808 maxmod] tarball and extract in the same place.
| |
| | |
| tar -xvjf <maxmod-nds tarball>
| |
| | |
| Download the [http://sourceforge.net/projects/devkitpro/files/filesystem/ libfilesystem] tarball and extract in the same place.
| |
| | |
| tar -xvjf <libfilesystem tarball>
| |
| | |
| Lastly you'll need the arm7 binary that handles the wifi, audio and touchscreen on the DS.
| |
| | |
| Download the [http://sourceforge.net/project/showfiles.php?group_id=114505&package_id=156994 default arm7] tarball and extract, still inside the libnds folder.
| |
| | |
| tar -xvjf <default arm7 tarball>
| |
| | |
| Now all that remains for DS programming is the examples archive. Move back to the devkitpro folder and create an examples/nds folder.
| |
| | |
| cd ..
| |
| mkdir -p examples/nds
| |
| | |
| Grab the [http://sourceforge.net/project/showfiles.php?group_id=114505&package_id=159894 nds examples] archive from sourceforge & extract it here.
| |
| | |
| tar -xvjf <examples tarball>
| |
| | |
| Add these variables in your execution environment, for instance, editing the .bashrc file located in your home folder:
| |
| | |
| export DEVKITPRO=/opt/devkitpro
| |
| export DEVKITARM=$DEVKITPRO/devkitARM
| |